Articles and Press Releases

Available for the ActCAD 2023 product suite based on the IntelliCAD 11.1 engine, ActCAD maintenance release 1432 is now available and includes numerous improvements and updated ODA libraries. To get the latest ActCAD 2023 Prime, Professional, Standard, and Map Drafter versions, ActCAD users can update using the ActCAD command CHECKFORUPDATES.

The most recent ActCAD versions are also available directly from the ActCAD website in the downloads area.

• Learn more about ActCAD 2023 >>
• Get more details about ActCAD maintenance releases >>

Available in 64- and 32-bit, ActCAD is a native .dwg and .dxf CAD software program used for 2D drafting and 3D modeling. ActCAD is based on the IntelliCAD engine. To learn more about how ActCAD and the ITC work together, see the case study. To learn more about IntelliCAD's .dwg technology, go here.

Headed to the International Congress of Steel Construction (ICCA) event in Bogota, Columbia this week, June 28 to 30, 2023? Be sure to stop by Stand #6 to see FRAMECAD and how it uses IntelliCAD in its design and build systems.

• Get event details >>
• Learn about FRAMECAD >>

FRAMECAD uses IntelliCAD in its end-to-end steel frame design and manufacturing system for rapid construction of buildings. To learn how FRAMECAD benefits from ITC membership, read the success story. To find out more about IntelliCAD's BIM technology, go here.

Hardware equipment and software from Carlson Software will be used to perform a geophysical survey at the Cahokia Mounds, located at modern-day St. Louis, Missouri, USA. The project includes use of Carlson's rovers (RTK BRx6+ and BRx7 GPS systems), GNSS receivers, and SurvPC software.

Get details at xyht.com >>

Carlson Software has been a member of the ITC since 2007 and many of their products use the IntelliCAD engine. To find out how Carlson Software and the ITC work together, see the success story. To find out more about IntelliCAD's .dwg technology, go here.

ZWCAD 2024 is now available and includes new features such as flexiblocks, quick properties, point cloud and .dgn file attachments, area tables, and key improvements in several other areas. 

• Get ZWCAD 2024 details >>
• Try ZWCAD 2024 >>

ZWCAD is developed by ZWSOFT and is a .dwg-compatible CAD solution with a familiar CAD interface and easy-to-use commands. ZWSOFT has been an ITC member since 2002, and its products are used by over 900,000 users from more than 90 countries and districts. 

Carlson iCAD 2023 is available now! Carlson iCAD 2023 is 2D and 3D CAD modeling software that can open and save .dwg, .dgn, and .dxf files, print, convert Civil 3D objects, and perform all the drawing and editing operations you would expect in a CAD program. Based on IntelliCAD and including all the features in IntelliCAD 11, Carlson iCAD 2023 can be purchased as a low-cost perpetual license.

Learn about iCAD 2023 >>

Carlson Software has been a member of the ITC since 2007. To find out how Carlson Software and the ITC work together, see the success story. To find out more about IntelliCAD's .dwg technology, go here.

Headed to New Orleans next week for the CFSEI Expo and the latest happenings in the cold-formed steel framing industry? While you're there, check out FRAMECAD to see how it uses IntelliCAD in its design and build systems!

• Get event details >>
• Learn about FRAMECAD >>

FRAMECAD uses IntelliCAD in its end-to-end steel frame design and manufacturing system for rapid construction of buildings. To learn how FRAMECAD benefits from ITC membership, read the success story. To find out more about IntelliCAD's BIM technology, go here.

Version 1393 is now available for ActCAD 2023 Prime, Professional, Standard, and Map Drafter. The maintenance release includes several enhanced commands, improvements, and updated ODA libraries. To get the latest ActCAD 2023 maintenance release, ActCAD users can update using the ActCAD command CHECKFORUPDATES.

The latest ActCAD version is also available directly from the ActCAD website in the downloads area.

• Learn more about ActCAD 2023 >>
• Get the news >>

Available in 64- and 32-bit, ActCAD is a native .dwg and .dxf CAD software program used for 2D drafting and 3D modeling. ActCAD is based on the IntelliCAD engine. To learn more about how ActCAD and the ITC work together, see the case study. To learn more about IntelliCAD's .dwg technology, go here.

ENDUROCADD® 12.01.00 and ENDUROCADD NX version 1.2.9.0 are now available, including the ability to use levels and walls. The newest versions are available to end users and were highlighted at the ENDUROFRAME® user conference last month. 

• Learn more about ENDUROCADD >> 
• Get the ENDUROFRAME user conference presentation slides >>

ENDUROCADD software is developed by BlueScope® Steel and is part of the ENDUROFRAME system for manufacturing light gauge steel frames; it includes a complete package of design software, production management software, rollformer, accessories, and support. ENDUROCADD software is based on the IntelliCAD engine. To learn more about using IntelliCAD as a native .dwg platform, go here. To learn about how BlueScope Steel and the ITC work together, see the success story.

The focus of progeCAD 2024 is on speed, new design commands, and industry-specific features. It includes new commands such as Who Has, Regen Visible, Smart Join, Break at Point, Center Mark, Center Line, Map Import, many new 3D visualization commands, extended table support, and many more. progeCAD 2024 also continues to be available with a perpetual license.

• See what's new and get a free trial >>
• Learn about progeCAD 2024 >>

progeCAD 2024 is 2D/3D DWG/DXF-native CAD software based on the IntelliCAD 11.1 engine. Its AEC, MCAD, and general CAD users benefit from native .dwg compatibility, a perpetual software license, and robust features for working with CAD drawings.

To learn more about IntelliCAD's .dwg technology, go here. For details about how progeSOFT and the ITC work together, see the success story.

Both versions include AI tutorial support.

CADdirect 2023 is based on the IntelliCAD engine. To learn more about IntelliCAD and its .dwg technology, go here.